28
•
Every effort has been made to ensure the highest standards of reliability for your phone.
However, if something does go wrong, do not try to repair it yourself – consult your
supplier.
SPECIFICATIONS
TYPE DESCRIPTION
Handset L x W x H
5.55 x 1.73 x 0.94 in
Handset weight
4.41oz (with battery)
Base L x W x H
4.96 x 4.48 x 1.50 in
Base Weight
5.29 oz
Standard
Worldwide Digital Cordless Telecommunication (WDCT)
Frequency range
2.4GHz ISM
Channel bandwidth
1.729MHz
Modulation GFSK
Communication range
Up to 984ft in open area
Base power supply
120V / 60Hz
Handset power supply
1 x NiMH 650mAh 3.6V (AAA) battery pack
Operating time
Standby: Approximately 120 hours
Talk: Approximately 5 hours
Operating temperature
32
°
F to 113
°
F
Storage temperature
-4
°
F 140
°
F
FCC STATEMENT
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio / TV technician for help.
CAUTION
To maintain the compliance with the FCC’s RF exposure guideline, place the
base unit at least 20 cm from nearby persons.
