11
INSTALLATION
2
Install one 9V battery.
•
Press in on the tabs and remove the telephone base.
•
Use a small Phillips head screwdriver to remove the screw
and open the battery door.
•
Insert the 9V battery (included), and replace the screw to
close the battery door.
•
Replace the telephone base.
NOTE:
The battery retains telephone memory in the event of a power
failure. If power fails and a working battery is installed, this phone will
work only to dial and answer calls with the handset or headset. No other
features will work until power is restored.
3
Connect the telephone line cords to the telephone.
Please refer to line cord connection instructions in
Step 2
of
“Table/Desk Installation” on page 9.
4
Turn the base, as shown, and attach it to the bottom of
the phone.
955_00_1ATT CIB #change 10/24/02 9:48 AM Page 11
