21
TELEPHONE OPERATION
To make a call,
press and release
h
or press the desired LINE
button and then press
h
. The HEADSET light goes on. Wait for a
dial tone, then dial the call.
To answer a call,
press
h
. Press
h
again to end the call.
NOTE:
If speakerphone is programmed as the default mode (See “Set
Automatic Audio Mode” in FEATURE SET UP), you must press
h
t
o activate the headset.
Switching Modes
To switch from handset to headset or speakerphone,
press
h
or
K
, then replace the handset (for headset, headset must be plugged in).
To switch from speakerphone to handset,
lift the handset. (Do not
press
K
or the call will be disconnected.)
To switch from headset to handset
(when handset is in the cradle),
lift the handset.
To switch from headset to handset
(when handset is off-hook), press
h
again.
To switch from headset to speakerphone
(when handset is in the
cradle), press
K
.
To switch from headset to speakerphone
(when handset is off-hook),
press
K
and replace the handset.
To switch from speakerphone to headset,
insert the headset plug into
the jack, and press
h
.
To override automatic line selection,
press and release a LINE button
(this activates the speakerphone or headset, whichever is programmed as
the default mode).
Timer
When you make or answer a call, the timer automatically starts. The screen
displays the elapsed time in minutes and seconds for the first hour (up to
59:59
) and then begins again. The timer stops automatically when you
hang up and the recorded time is displayed for about 10 seconds.
The timer also stops when you place a call on hold and resets when you
release hold.
Pause
While dialing a call press
P
where you want to insert a three-second
pause in the dialing sequence. This is useful if you are dialing a long-distance
access code and the long-distance carrier requires a pause between the
access code and the telephone number.
