AT&T EL52209 User Manual Download Page 26

Page: 26 / 73

Telephone operation

Options while on calls

Volume control

While on a call, press

VOLUME/

CID

to decrease or press

VOLUME/

DIR

increase the listening volume.

Call waiting

If you subscribe to call waiting service with your local telephone service provider,
you hear a beep if someone calls while you are already on a call. Press

PHONE

/FLASH

to put your current call on hold and take the new call. Press

PHONE

/FLASH

at any time to switch back and forth between calls.

Mute

Use the mute function to turn off the microphone. You can hear the caller, but
the caller does not hear you.

To mute a call:

•

Press

MUTE/

DELETE

. When mute is on, the handset screen

shows

MUTED

for a few seconds and the

MUTE

icon

appears until you turn off mute.

To un-mute a call:

•

Press

MUTE

/DELETE

again. When mute is off,

MICROPHONE ON

appears temporarily on the handset

screen.

NOTES

1. Handset and speakerphone volume settings are independent.
2. When the volume reaches the minimum or maximum setting,

you hear two beeps.

QIPOF!!!1;11;41

NVUFE

MUTE

Summary of Contents for EL52209










































































Search results

Summary of Contents for EL52209

Reviews:

Related manuals for EL52209

Brands by name

Popular brands

AT&T EL52209, User Manual

Search results

Summary of Contents for EL52209

Reviews:

Related manuals for EL52209

Brands by name

Popular brands