32
Appendix
Troubleshooting
• Re-install the battery, and place handset in base cradle.
• Wait for the handset to re-establish its connection with the base. To
be safe, allow up to one minute for this to take place.
If you subscribe
to DSL service
• If you hear noise during conversations and/or your caller ID features
aren’t functioning properly, install a noise filter to the telephone line
between the base unit and the telephone line jack. Contact your DSL
provider to obtain a noise filter.
Can’t connect
displays on my
handset.
• Place the handset in base cradle for 1 minute to allow the handset
and base re-synchronize channels.
• Move the handset closer to the base. You might have moved out of
range.
• If the handset is in its base and the charging light does not come on,
refer to the charge light is off in this troubleshooting guide.
• Reset the base. Unplug the unit’d electrical power. Wait for 15 sec-
onds then plug it back in. Allow up to one minute for the handset and
base to reset.
• Other electronic products can cause interference with your cord-
less phone. Try installing your phone as far away from these types of
electronic devices as possible: wireless routers, radios, radio towers,
page towers, cell phones, intercoms, room monitors, televisions, per-
sonal computers, kitchen appliances and cordless phones.
The batteries
will not hold a
charge.
• Charge the battery in the handset for 16 hours. For optimum daily
performance, return the handset to its base when not in use.
• You may need to purchase a new battery, please refer to the batteries
section of this user’s manual.
• You phone might be malfunctioning. please refer to the warranty sec-
tion of this user’s manual for further instruction.
