FCC Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver
— Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Specifications
Sampling Method:
Adaptive Delta Modulation (ADM)
Sampling Frequency (Switch
Selected):
32/45 Kilobits/sec.
Message Length (Switch Selected):
3 or 4 minutes
Power Required:
12V AC/DC. Power supply included with
the unit provides 12VAC @ 800mA from
11OVAC source
External Speaker Power:
1 Watt into 8 ohms
Input:
High-quality Magic On Hold cassette-
tape. Fully automatic operation
Output:
LINE 600-ohms/transformer-balanced via
RCA phono jack; 1Watt into 8-ohms via
RCA jack (can be used to power an
external speaker)
Controls:
POWER on/off switch; SPEAKER on/off
switch; VOLUME control (for monitor
speaker, 1WATT and LINE output jacks);
TRlG(ger) jack for single play operation
Indicators:
LEDs for POWER, PLAY and RECORD
Mounting:
Desk-top or wall-mounting, template and
hardware included
Dimensions:
7-7/8" x 6-3/8" x 3-1/4"
Shipping Weight:
3 lbs.
Cassette Tape:
Magic On Hold - AT&T Customized
Programming Service
