Testing Your System
Digital Life User Manual
|
Page
62
of
62
ATT-UM-V1.1-201303
Device
Procedure
Results
Notes
Takeover
Module
(SW-ATT-
TAKRF)
•
DLS in
Test/Maintenance
Mode
Note:
The Takeover
Module can be utilized to
re-use the existing wired
door/window sensors in
your home. In order to
test the Takeover Module,
you can open the wired
door/window sensors one
at a time.
End-to-End Testing
•
Test each existing
wired door/window
sensor one at a time by
executing the following
procedure:
o
Arm the system in
the Armed-STAY
Mode
o
Open one protected
door or window
o
After the alarm has
been observed,
enter your Alarm
Panel PIN to cancel
the alarm and then
enter your Alarm
Panel PIN again to
clear the message
End-to-End Testing
•
For each existing wired
door/window sensor
•
Keypad LCD will display:
<Device Name> -
Opened (For example,
“Master Bedroom
Window - Opened”)
•
Keypad LCD will display:
Intrusion Alarm Sent
•
Keypad LCD will
Display: Alarm – Enter
PIN to Cancel
•
Keypad LCD will display:
Alarm Canceled
•
Keypad LCD will display:
Enter PIN to Clear
•
An Intrusion alarm
has been sent to
AT&T Digital Life
Central Monitoring
Center with no
action required
