background image

Answering system

50

About the answering system

Answering system and voicemail indicators

Your telephone has separate indicators for two different types of voice 
messages: those left on its built-in digital answering system 
and those left at your telephone ser

vice provider’s voicemail 

(fees may apply). Your telephone’s built-in digital answering 
system messages and voicemail messages are separate.  
Each alerts you to new messages differently. 

If 

 and 

XX New messages

 show on the handset  

and the message window on the telephone base  
flashes, there are new messages in the built-in  
answering system.

 

To listen to messages recorded on 

your digital answering system, press 

/PLAY/

STOP

  

on the telep

hone base (page 53).

If   and

 New voicemail 

display on the handset, your telephone service 

provider is indicating that it has new voicemail for you. To listen to 
your voicemail, you typically dial an access number provided by your 
telephone service provider, followed by a security code or PIN. 

Some telephone service providers bundle or combine multiple services 
like voicemail and call waiting, so you may not be aware that you have 
voicemail. To check what services you have and how to access them, 
contact your telephone service provider. 

To use your voicemail service rather than your answering system, turn off 
your answering system. To use your answering system rather than your 
voicemail service, contact your telephone service provider to deactivate 
your voicemail service. 

NOTE:

 After reviewing all new messages, the number of old messages appears on the 

message window.

Using the answering machine and voicemail together

You can also use your telephone answering system and voicemail together 
by setting your built-in answering system to answer before voicemail 
answers as described below. To learn how to program your voicemail 
settings, contact your telephone service provider. If you are on a call, or if 
the answering system is busy recording a message and you receive another 
call, the second caller can leave a voicemail message.

Set your answering system to answer calls at least 2 rings earlier than your 
voicemail is set to answer. For example, if your voicemail answers after 6 
rings, set your answering system to answer after 4 rings. Some voicemail 
providers may program the delay before answering calls in seconds instead 
of rings. In this case, allow 6 seconds per ring when determining the 
appropriate setting.

    HANDSET   1 

1 New message

10/15

10:01

AM

ANS ON

Summary of Contents for CL82311



























































































Reviews: