Caller ID
This product supports caller ID services offered by most telephone service providers.
The telephone stores caller ID information of the last 50 incoming calls in the
telephone base. This information is common to all devices.
Missed call indicator
When a handset is in idle mode and has new or missed calls, its screen shows
XX Missed calls
.
You can erase the missed call indicator either by reviewing the call log one by
one, or by pressing and holding
CANCEL
in idle mode.
Review and dial a number in the call log
1.
CID
in idle mode
->
q
or
p
to scroll through the list.
2.
PHONE
or
/SPEAKER
to call when the desired entry is displayed.
Caller ID announce
When this feature is on and you have an incoming call, the handset speaks
“Call from...”
and the name of the caller based on the directory or caller ID
information. You can turn this feature off at the base or on each individual
handset, or both.
1.
MENU
->
q
or
p
->
Settings
->
SELECT.
2.
q
or
p
->
Caller ID annc
->
SELECT
.
3.
q
or
p
to choose
Set all On/Off
,
Local handset
or
Base
->
SELECT
.
4.
q
or
p
to choose
On
or
Off
->
SELECT
.
Call block
If you have subcribed to caller ID service, you can use the call block feature to
reject certain calls automatically. The call block list can store up to 20 entries.
This feature is only available on the cordless handset.
Operation
Steps
Adding a call
block entry
1.
MENU
->
q
or
p
->
Call block
->
SELECT
.
2.
SELECT
to select
Block list
.
3.
q
or
p
->
Add new entry
->
SELECT
.
4. Enter a telephone number up to 30 digits ->
SELECT
.
5. Enter a name up to 15 characters ->
SELECT
.
Blocking calls
without number
1.
MENU
->
q
or
p
->
Call block
->
SELECT
.
2.
q
or
p
->
Calls w/o num
->
SELECT
.
3.
q
or
p
to choose
Not block
or
Block
.
Directory
The directory can store up to 50 entries, which are shared by all system handsets.
Operation
Steps
Adding an entry
1.
MENU
.
2.
q
or
p
->
Directory
->
SELECT
.
3.
q
or
p
->
Add contact
->
SELECT
.
4. Enter a telephone number up to 30 digits ->
SELECT
.
5.
Enter a name up to 15 characters ->
SELECT
.
Searching/dialing
an entry
1.
DIR
in idle mode.
2. Press
q
or
p
to browse through the directory, or
press
the dialing keys (
0
-
9
) to start a name search.
3. Press
PHONE
or
/SPEAKER
on a handset to call.
Answering system
About answering system and voicemail
Your telephone has separate indicators for two different types of voice messages:
those left on the built-in answering system and those left at your telephone
service provider’s voicemail. To listen to messages recorded on the built-in
answering system, refer to the
Message playback
section; to listen to voicemail,
contact your telephone service provider for more information.
Turn answering system on/off
The answering system must be turned on to answer and record messages.
1.
MENU
.
2.
q
or
p
->
Answering sys
->
SELECT
.
3.
q
or
p
->
Answer ON/OFF
->
SELECT
.
4.
q
or
p
to choose
On
or
Off
->
SELECT
.
When the answering system is on, the handset shows
ANS ON
.
Message alert tone
When this feature is on, and there is at least one new message, the telephone
base beeps every 10 seconds.
1.
MENU
->
q
or
p
->
Answering sys
->
SELECT
.
2.
q
or
p
->
Ans sys setup
->
SELECT
.
3.
q
or
p
->
Msg alert tone
->
SELECT
.
4.
q
or
p
to choose
On
or
Off
->
SELECT
.
Call screening
Use this feature to choose whether incoming messages can be heard over
at the telephone base when they are being recorded. If you turn call screening
on, you hear the incoming message at the telephone base. While monitoring an
incoming message, you can answer the call by pressing
PHONE
on the handset.
1.
MENU
->
q
or
p
->
Answering sys
->
SELECT
.
2.
q
or
p
->
Ans sys setup
->
SELECT
.
3.
SELECT
to select
Call screening
.
4.
q
or
p
to choose
On
or
Off
->
SELECT
.
© 2014 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 3.1 AT&T 12/14.
For more detailed instructions, please refer to the Abridged user’s manual
provided in your package, or for a full set of installation and operation
instructions, refer to the online
CL82114/CL82214/CL82314/CL82364/CL82414/
CL82464/CL82514 DECT 6.0 cordless telephone/answering system with
caller ID/call waiting
Complete user’s manual at
www.telephones.att.com/manuals
.
For customer service or product information, visit our website at
www.telephones.att.com
or call
1 (800) 222-3111
. In Canada, dial
1 (866) 288-4268
.
Message playback
Using the telephone base:
Press
/PLAY
when the telephone base is in idle mode.
Using a cordless handset:
Press
MENU
twice when the handset is in idle mode.
Options during playback
Feature
On the telephone base
On a handset
Adjust playback volume
Press
q
VOLUME
or
p
VOLUME
Press
q
VOLUME
or
p
VOLUME
Stop playback
Press
/STOP
Press
5
Skip to the next message
Press
/SKIP
Press
6
Repeat the message
Press
/REPEAT
Press
4
Play the previous message
Press
/REPEAT
twice
Press
4
twice
Delete the message
Press
X/DELETE
Press
DELETE
Initial settings (continued)
Record your own announcement
Your outgoing announcement plays when calls are answered by the answering
system. You can use the preset announcement to answer calls, or replace it
with your own recorded announcement.
1.
MENU
->
q
or
p
->
Answering sys
->
SELECT
.
2.
SELECT
to select
Announcement
.
3.
SELECT
to select
Record annc
.
4. Facing the handset, record your announcement and press
5
to end recording.
Number of rings
You can set the answering system to answer an incoming call after two, three,
four, five or six rings, or toll saver. If you choose toll saver, the answering
system answers a call after two rings if you have new messages, or after four
rings when there are no new messages. This enables you to check for new
messages and avoid paying unnecessary long distance charges if you are
calling from out of your local area.
If you want the built-in answering system instead of the voicemail to answer a
call, you should set the answering system to answer a call at least two rings
before the voicemail is set to answer. Contact your telephone service provider
for information on your voicemail settings.
1.
MENU
->
q
or
p
->
Answering sys
->
SELECT
.
2.
q
or
p
->
Ans sys setup
->
SELECT
.
3.
q
or
p
->
# of rings
->
SELECT
.
4.
q
or
p
to choose among
2, 3, 4, 5, 6
or
Toll saver
->
SELECT
.
Ringer volume
You can set the ringer volume level to one of the six levels or turn the
ringer off.
1.
MENU
->
q
or
p
->
Ringers
->
SELECT
.
2.
SELECT
to select
Ringer volume
.
3.
q
or
p
to choose the desired level ->
SELECT
.
Reset language to English
If you have accidentally changed the screen display language and want to
switch it back to English, follow the steps mentioned below.
MENU
in idle mode -> enter
364#
.
•
Telephone operation
Operation
Steps
Making a call
Press
PHONE
or
/SPEAKER
SPEAKER
-> Enter the telephone number.
On-hook dialing
(predialing)
Enter the telephone number -> Press
PHONE
or
/SPEAKER
SPEAKER
to call.
Answering a call Press
PHONE
or
/SPEAKER
SPEAKER
, or press any dialing keys
(
0-9
,
TONE
or
#
).
Ending a call
Press
OFF
or return the handset to the telephone base
or charger.
Handset
speakerphone
During a call, press
/SPEAKER
SPEAKER
to switch between
handsfree speakerphone and normal handset use.
Redial
Press
REDIAL
repeatedly to select the desired entry
->
PHONE
or
/SPEAKER
SPEAKER
to call.
Volume control
Press
q
VOLUME
to decrease or press
p
VOLUME
to
increase the listening volume during a call.
Call waiting
(Requires subscription
from telephone
service provider)
Press
FLASH
to put current call on hold and to take
the new call; press again to switch back and forth
between calls.
