Adding and registering handsets
Before using a new CL80113 handset, you must register it with the
AT&T CL81113/CL81213/CL81313/CL82113/CL82213/CL82263/
CL82313/CL82363/CL82413/CL82463/CL83113/CL83213/
CL83263/CL83313/CL83363/CL83413/CL83463 telephone system
(purchased separately). The telephone system can support up to
12 handsets.
The handsets provided with your telephone system are already
registered as
HANDSET 1
and so forth. Additional handsets
registered to the telephone system are assigned in sequential
order they are registered (up
to
HANDSET 12
).
You must register each handset separately. When first purchased, all
expansion handsets show
To register HS, see manual
.
Register a handset to your telephone base
1. Before you begin registration, make sure the
handset is out of the telephone base or charger
and shows
To register HS, see manual
.
2.
Put the handset you wish to register on the
telephone base cradle.
Registration and deregistration
8
To register HS,
see manual.
For registration, put the handset on the
telephone base, not the handset charger.
