background image

I get noise, static, or weak signals even when I’m near the 
telephone base.

If you subscribe to high-speed Internet service (DSL - digital 
subscriber line) through your telephone line, you must install a 
DSL filter between the telephone line cord and the telephone 
wall jack. The filter prevents noise and caller ID problems as 
a result of DSL interference. Please contact your DSL service 
provider for more information about DSL filters.
You may be able to improve the performance of your cordless 
phone by installing your new telephone base as far as possible 
from any other existing cordless telephone system that may 
already be installed.
Other electronic products such as HAM radios and other DECT 
phones can cause interference with your cordless phone. Try 
installing your phone as far away as possible from these types 
of electronic devices.
Do not install this phone near a microwave oven or on the same 
electrical outlet. You might experience decreased performance 
while the microwave oven is operating.
If you plug your phone in with a modem or a surge protector, 
plug the phone (or modem/surge protector) into a different 
location. If this does not solve the problem, relocate your phone 
or modem farther apart from one another, or use a different 
surge protector.
Move your phone to a higher location. The phone might have 
better reception in a high area.
If the other phones in your home are having the same problem, 
contact your telephone service provider (charges may apply).

I experience poor sound quality when using the speakerphone. 

For increased sound quality while using the speakerphone, place 
the handset on a flat surface with the dialing keys facing up.

Troubleshooting

Appendix

14

Summary of Contents for CL80113



































Reviews: