Single-Light Feature Buttons
The 18 buttons shown in Figure 6 are arranged in 3 columns of 6 buttons. Each button
has a label and a green light. The last button in the first column is preprogrammed as
the [
Mute
] button. You can use the [
Mute
] button when you are active on a call and
want to speak, perhaps to someone near you, without being overheard by the caller.
Operation of the [
Mute
] button is described on page 12.
The person who manages your system can administer the remaining 17 buttons to
activate and deactivate features or to perform special functions. One of these buttons
will be administered as a [
Release
] button, which is necessary for proper ACD
operation. You must press [
Release
] to return to normal mode:
●
●
After every call.
If power is removed or after any service-affecting maintenance test has been run on
your switch.
When you press [
Release
], a dial tone will not be returned.
Figure 6. Single-Light Feature Buttons
6
