O P E R A T I O N
Power ON/OFF
In order to use this phone, you must make sure the POWER ON/
OFF switch on the handset is set to ON. You can save battery
power in the handset when the switch is set to OFF, but you will
be unable to make or answer calls.
Making a Call
1
Press
P
, and wait for the PHONE light to go on steadily.
2
When you hear a dial tone, dial the number you’re calling.
Answering a Call
•
If the handset is in the base, lift the handset. The PHONE
light goes on, and the call is connected.
•
If the handset is away from the base, press
P
or any
key on the handset, including
V
. The PHONE light
goes on, and the call is connected.
Ending a Call
•
If you are near the base, place the handset in the base.
•
If you are away from the base, press
P
.
Redial
The last number dialed (up to 32 digits) on this phone is stored in
redial memory until you dial another number.
1
Press
P
, and wait for the PHONE light to go on.
2
When you hear a dial tone, press
R
.
Redial
last number
called
Make,
answer, or
end a call
Store/access
numbers in
telephone
memory
LOW BATT
light shows
battery power
is low
Turn handset
RIGNER
ON or OFF
Temporary
Tone
Prevent
caller from
hearing you
Access
phone
company
subscriber
services
Make or
respond to
intercom call
Receiver/
Ringer
Volume
Control
Mute
The Mute feature allows you to hear your caller, but prevents the
caller from hearing you.
While on a call: Press
M
.
To continue your conversation with the caller: Press
M
again.
Ringer Controls
Handset Ringer Volume
In standby mode, adjust the handset ringer volume by pressing
+
on the handset to increase volume, or
-
to decrease.
Base Ringer Volume
Set the Ringer ON/OFF switch on the back of the base to ON if
you want the base to ring, then press
+
or
-
on the
front of the base to select high or low ringer volume.
Set the switch to OFF if you don’t want the base to ring. When
the Base Ringer is OFF, the base won’t ring, but the IN USE light
will flash when a call is coming in.
Ringer Selection
You can choose from four different ringing options. Your selected
setting affects both the handset and the base.
1
Make sure the phone power is set to ON, but the phone is
not in use.
4
