Charging the Handset Battery Pack
The battery pack needs charging when
•
The phone beeps periodically.
•
The LOW BATT light on the handset flashes.
•
The phone does not respond when you press
P
, and
no lights go on.
Place the handset face down in the base so the CHARGING light
goes on. The battery pack will be fully charged in 14 hours. The
handset can be ON or OFF while the battery pack is charging. To
increase the life of the battery pack, allow the battery to discharge
fully before charging.
A fully charged battery maintains standby power for up to 7 days
and up to 4 hours of continuous talk time, when the handset is on
and not in the base. If it’s more convenient for you, you can leave
the handset in the base all the time. It is impossible to overcharge
the batteries. If you get a low battery indicator even after 14 hours
of charging, the battery should be replaced.
CAUTION: To reduce the risk of fire or damage to
persons or damage to the telephone, read and follow these
instructions carefully.
•
Use only replacement battery 3094.
•
Do not dispose of the battery in a fire. The cell might
explode. Check with local codes for special disposal
instructions.
•
Do not open or mutilate the battery. Released
electrolyte is corrosive and may cause damage to the eyes
or skin. It may be toxic if swallowed.
•
Exercise care in handling batteries in order not to short
the battery with conducting materials such as rings,
bracelets, and keys. The battery or conductor may
overheat and cause harm.
•
Charge the battery provided with or identified for use
with this product only in accordance with the
instructions and limitations specified in this manual.
B A T T E R I E S
Replacing the Handset Battery Pack
1
Use a coin to pry the edge of the battery pack from the
battery compartment, then lift it out.
2
Align the battery contacts as shown below, then snap the
new battery in place and replace the cover.
+
–
3
