manualshive.com logo in svg

AT&T 984, User Manual, Page: 80 / 145

Share
Download
AT&T 984 User Manual Download Page 80

One touch oper

ation

One touch oper

ation

74

Dial a one touch number

This phone comes with One touch preference
programmed to 

INTERCOM

. These instructions apply only

if you have not changed One touch preference.

NOTE:

To change One touch preference, see 

Set

one touch preference

on page 25 of this manual.

If One touch preference is set to

INTERCOM

:

1.

Lift the handset.

—OR—

Press 

K

.

—OR—

Press 

h

and listen for the dial tone.

2.

Press the 

EXT

button.

—OR—

Press 

W

, then press the 

EXT

button for 

the number you want to call.

The screen displays the number as it is dialed.

If One touch preference is set to 

TELEPHONE

,

you do not need to go off hook and listen for a dial tone

before you dial a one touch number. You can simply:

1.

Press the 

EXT

button.

—OR—

Press 

W

, then press the 

EXT

button for 

the number you want to call.

The screen displays the number as it is dialed
using the speakerphone or headset as
programmed for automatic mode. (See 

Set

automatic mode

on page 35.)

l

l

l

l

l

n

n

n

n

n

i

i

i

i

i

k

k

k

k

k

k

k

k

k

k

984CIB_(Rev3)28.04.06  4/28/06  6:28 PM  Page 74

Summary of Contents for 984


















































































































































Reviews:

No comments