Atak XD6220, Installation Manual, Page: 4 / 8

2
Center the Brackets (2) vertically on the rear of the TV. Attach the Brackets (2) to the rear of the TV
using two of the bolts (A-H) with the proper size washers (I-J) as shown in Fig. 1.
Do not over tighten.
If the back of the TV is not flat, or if the bolts are too long, it may be necessary to use Spacers (K-N)
as shown below. Multiple Spacers can be used with each bolt to reach the proper length.
Attach the Wall Spacers (3) to the rear of the TV using two of the bolts (A-H) with the proper size
Washers (I-J) and Spacers (K-N) (If Necessary) as shown in Fig. 1.
2
3
2
3
A/B/C
I/J
D
M/N
E/F/G
I/J
K/N
H
L/M/N
Fig. 1
Example 1:
No spacers
with “A/B/C”
bolts
Example 2:
Spacers with
“D” bolts
Example 3:
Spacers with
“E/F/G” bolts
Example 4:
Spacers with
“H” bolts