8 9
INITIAL SETTINGS
Initial settings page is for you to make your preferred settings up for your player. Once the initial
settings are done they are retained in the CPU of the player until otherwise modified.
COMMON PROCEDURES FOR INITIAL SETTINGS
1. Press SETUP button.
2. Use the navigation buttons to highlight the item you want to modify, at the moment its setting
page with further setting items displayed shows on the TV screen. Again use navigation
buttons to make changes. Press the OK button to confirm modifications.
3. Use navigation buttons to switch to another setting on the main setting page.
4. Press SETUP button to exit main setting page.
1. General Setup
1.1 TV Display
- it is used to select the TV scan mode, please set as per your TV set.
Options: Normal/PS
Normal LB
Wide
1.2 Angle Mark
- it is used to select whether or not the multi-angle icon is display on the screen
when a Multi-angle DVD disc is playing.
Options: On: Icon will be turned on
Off: Icon will be turned off
1.3 OSD Language
- it is used to select different On Screen Display language for different user.
1.4 Screen Saver
- when the player is not in used for several minutes, a running DVD logo will
move across the TV screen to protect the TV screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
1.5 Exit Setup
- Select it to exit setup menu.
2. Audio Setup
2.1 Downmix
Options: Lt/Rt - Left/Right mix mode
Stereo - Select this option if you don't have a 5.1 channels amplifier.
2.2 Exit Setup
- It is used to exit setup menu.
3. System Setup
You only could access the system setup page at full stop mode or with the disc try is empty.
Press STOP button twice to enter the full stop mode during playback, and then use SETUP
button to enter system setup page via navigation button.
3.1 TV Type
- used to select the TV mode.
Please select this option as per your TV set.
3.2 Audio
- used to select preferred audio language.
(DVD only - need disc software support)
3.3 Subtitle
- used to select preferred subtitle language.
(DVD only - need disc software support)
3.4 Disc Menu
- used to select preferred disc menu language.
(DVD only - need disc software support)
3.5 Parental
- used to select rating levels. You need to enter password to enable this selection.
(DVD only - need disc software support)
3.6 Password
Options: Change
Select to change password.
Procedure to change password:
1) Enter the old password in the Old Password row
2) Enter new password in the New Password row
3) Enter the new password again in the Confirm Password row
If you forget the old password, you may reset the password by using the supervisor password:
1389
3.7 Default
- Reset to factory settings.
3.8 Exit Setup
- used to exit setup menu.
TROUBLESHOOTING
If your DVD player does not seem to be functioning properly, check the items below before you
contact an authorized service center.
Symptom Check
Power does not turn on or
suddenly turns off.
Make sure the AC/DC adapter is securely plugged into an AC outlet.
Turn the power off and then back on.
No picture or sound
Check that the A/V cables are securely connected.
Check that the disc is a DVD, DVD-RW or AUDIO CD.
Do not use a disc that has scratches or dirt.
Check that the label-side of the disc is facing up.
The pick-up lens of the DVD player may be dirty. Contact the service
center for lens cleaning.
Check that the TV channel is set to VIDEO or AV if viewing with a TV.
No picture
Check that the LCD display is turned on.
No sound
Check that the display panel is open. If it is closed, audio will not be
output to the speakers.
Check the volume setting. If set to zero, turn up volume level.
Check that the headphones are plugged into the PHONES socket.
Speakers cannot be used with the headphones.
No picture and sound
Check that the battery is properly installed and AC/DC Adapter is
properly connected.
Distorted video or sound
Use a disc without scratches or dents.
IMPORTANT SAFETY INSTRUCTIONS
The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
The AC/DC adaptor should not be obstructed or should be easily accessed during intended
use. To be completely disconnected the power input, the AC/DC adapter should be
disconnected from the mains completely.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Minimum distances 2.0cm around the apparatus for sufficient ventilation. The ventilation
should not be impeded by covering the ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
The use of apparatus is in tropical and/or moderate climates.
Attention should be drawn to the environmental aspects of battery disposal.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
The marking plate is located at the bottom of the apparatus.
