background image

4                                                                                                                                                                                                            5 

BASIC CONNECTION 

 

It is recommended to connect a multi-system TV. 

 

Ensure that this player and other equipment to be connected are set to the standby mode or 
off and disconnect the AC/DC adapter before commencing connection. 

 

Do not block ventilation holes of any of the equipment and arrange them so that air can 
circulate freely. 

 

Read through the instructions before connecting other equipment. 

 

Ensure that you observe the color-coding when connecting audio, video cables. If the RCA 
adapter is supplied only, the audio/video RCA cable is required. Plug one end of the RCA 
adapter to the unit. Then connect the audio/video RCA cable to the RCA adapter and the 
television. 

Note: 

 

During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If 
this is the case, adjust the volume to the desired level. 

 

If the DVD/CD player is connected to the TV through a VCR, the picture may not be played 
back normally with some DVDs. If this is the case, do not connect the player via the VCR

AUDIO R

AV AUDIO/VIDEO  INPUT

AUDIO L VIDEO IN

S-VIDEO

YUV INPUT

 

 

CONNECTING TO A CAR ADAPTOR 

The car power adaptor is designed for use with vehicles that have a 12V, negative ground 
electrical system. 
WARNING: Disconnect the car power adaptor when not in use. Not in use in 24V vehicles. 

 

 
 
 
CAUTIONS: 

 

Use the unit only with recommended car power adaptor; use with other car power adaptor 
might damage the unit. 

 

The recommended car power adaptor is for use with this unit only. Do not use it with other 
equipment. 

 

In the interests of road traffic safety, do not operate the unit or view video software while 
driving a vehicle.   

 

Make sure the unit is fastened securely to prevent from moving outside of the vehicle in an 
accident. 

 

When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section 
may become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.   

 

After use, disconnect the car power adaptor from both the unit and cigarette lighter socket. 

FUSE REPLACEMENT 

FUSE 

 

 

 

POSITIVE (+) CAP 

NOTE: Don't throw out the positive (+) cap when replace the fuse. 

 

CHARGE THE BUILT-IN BATTERY 

The player is with a rechargeable lithium battery. Before using the battery, please make sure it 
is charged. If not, charge it first. Slide the power switch to the OFF position and then connect 
one end of the supplied adapter to the wall outlet and the other end to the unit for charging the 
built-in battery.   
Note:    1. The battery only could be charged at powering off mode. 

2. If the unit is not in use for a prolonged period of time, it is recommendable to charge 

the built-in battery each three months. 

 

OPERATIONS 

PREPARATION 

Power on the TV set and select video input mode. 
Power on the audio system which is connected to the player

 

GET STARTED 

1. Switch POWER ON/OFF button to turn on the player. 
2. Press CD cover open button to place a disc onto the disc tray. 
3. Close the disc tray and the playback starts automatically. 
4. When a menu screen appears on the TV, press the navigation buttons to select a preferred 

track number, then press OK button to start playback. 

 

ENTER STANDBY MODE 

Press ON/STANDBY button to make the unit entered standby mode, press it again to turn on 
the unit. 

 

ADJUST THE VOLUME 

Press /- button on the remote or press and hold the VOL+/- button on the unit to 
increase or reduce the volume level. 

 

SKIP AHEAD OR BACK 

Press PREV or NEXT button once during play to skip a chapter (DVD) or a track (CD) ahead or 
backwards. 

 

RAPID ADVANCE/REVERSE 

During playback, press and hold the F. REW or F.FWD button several times to scan the disc 
forward or backward at a corresponding high rate of speed with each pressing. 
Press the PLAY/PAUSE button to resume normal play. 

 

STOP PLAYBACK 

Press STOP button during playback to stop playback; the player activates its resume function 
when the STOP button is pressed in STOP mode; press the PLAY/PAUSE button again, 
playback resumes at the point it stopped previously; open the disc tray or press the STOP 
button one more time to clear the resume function 

A/V cable 

TV SET 

To the cigarette lighter socket 

Summary of Contents for PDV5750







Reviews: