Installing the Base
9A700 - 8
1. Remove the two screws from the
top of the Extension Arm.
2. Locate the metal plate on the bottom
of the Extension Arm. Turn the Disc
below the metal plate counterclockwise
to create space between the disc & plate.
3. Slide the metal plate into the channel
on the rear of the TV. Secure the
Extension Arm to the rear of the TV by
turning the Disc clockwise.
4. Turn the TV Base upside-down and
locate the two small screw holes in the
opening at the bottom of the base.
Insert the two screws from Step 1 into
the holes using a magnetized phillips
head screwdriver or needle-nose
pliers.
5. Using a phillips head screwdriver
attach the TV Base to the Extension
Arm.
6. If necessary the Tilt & Helght of the
TV can be adjusted.
Adjust Tilt:
Turn the Tilt Adjustment
Knob counterclockwise. Adjust the
Tilt angle of the TV. Turn the Tilt
Adjustment Knob clockwise to lock.
Adjust Height:
Turn the round Disc
between the TV and the extension arm
counterclockwise. Slide the TV Base
up or down the Channel on the rear of
the TV. Turn the round disc clockwise
to lock.
Remove Screws
Turn Disc counter-
clockwise
Channel
Insert Screws
Attach Base to
Exension Arm
Tilt Adjustment
Knob
Loosen Disc to
Adjust Height
Extension Arm
