EN 10
INSTALLATION
Connection
Electric connection
The appliance has been manufactured as a class I. The cable must
be connected to an earthed socket!
Make sure the supply voltage ratings correspond with those stated on
the appliance data plate. The connection to the mains is carried out as
follows:
BROWN = phase L
BLUE = phase N
YELLOW/GREEN = earth
This canopy hood has been provided with a power plug. When installing
the hood, make sure that this plug remains accessible. We recommend
installing the wall socket out of view.
Attention!
If you are making a fixed connection, you must ensure that a double
pole switch with an air gap of at least 3 mm is fitted in the supply line.
If the connection cable is damaged, it should be replaced by the service
department of the manufacturer or similarly qualified persons in order to
prevent dangerous situations from arising.
Summary of Contents for WU11 PMM Series
Page 59: ...EN 17 ...
