EN 9
MAINTENANCE
Saturation of the odour/fine particle filter
After 300 operating hours, the exhaust setting and ‘C/F’ flash
alternately on the display. The odour filters must be cleaned.
Replacing the odour/fine particle filter
The odour/fine particle filter must be replaced annually (or when
indicated by the filter cleaning indicator). To replace the filter, follow the
instructions supplied with the new filter.
Important:
• The saturation of the filter depends on the intensity of use, the
manner of cooking and the regularity with which the grease filters
are cleaned.
2x
Reset the memory after replacing the odour filter. Switch on the
extractor hood and touch and hold the On/Off key for 3 seconds;
‘C/F’ will stop blinking.
Lighting
Replace the lighting
• The cooker hood is fitted with LED lighting.
• LED lamps guarantee you optimum lighting, a service life of up to
10 times longer than conventional lamps and energy savings of as
much as 90%.
Contact the technical department when LED lighting needs to be
replaced.
Summary of Contents for WS7011DL
Page 43: ...EN 13 ...
