Atag WS6211IM, Instructions For Use Manual

Page: 45 / 50

EN 9
MAINTENANCE
Grease filters
Removing grease filters
Switch off the main Voltage! Remove the plug from the socket or turn
the switch in the meter box to zero. Pull the filter towards you and tilt it
down and forwards.
Carbon filter
Replacing the carbon filter
Use a carbon filter if the extractor fan is not connected to an exhaust
duct.
1. Remove the grease filters
2. Install the carbon filters (x)
3. Install the grease filters.
Important:
• The saturation of the filter depends on the intensity of use, the
cooking method and the regularity with which the grease filters are
cleaned.
• The carbon filter must be replaced a minimum of every four months.
• Carbon filters cannot be washed for re-use. Saturated carbon is not
environmentally friendly. Replace the filter in time.
Bulbs
Attention!
This hood is fitted with LED light! These have to be replaced by a
authorized technician. Do not attempt to replace LED light by yourself.