GB 16
assembly
buiding in
flange installation
Install the flange supplied to the upper or rear exhaust outlet
as desired (bayonet fastening).
recirculation mode only
Make sure the charcoal filter is installed and the internal
Extraction/ Recirculation mode switch is set to "Recirculation".
For further details relating to the charcoal filter, please refer
to page 10.
wall unit mounting
1. Make the holes on the bottom of the cupboard (2),
using the drilling template (1). Make a hole for the
exhaust pipe (4)
only
if the hood is to be used in the
extraction mode (3).
2. From inside the cupboard, insert the 4 supplied screws
(5) and tighten them in the appropriate holes on the
appliance.
extraction
recirculation
88028282 HL WO60.qxd 09-06-2009 11:04 Pagina GB 16
