Atag VD16 D Series, Instructions For Use Manual

Page: 18 / 52

EN 6
DESCRIPTION AND USE
Operation
Operate the vacuum drawer with the control panel on the top of the
drawer.
1. Push the drawer in somewhat and slide it out of the cupboard.
2. Switch on the drawer with the On/Off touch key. Press the On/Off
touch key until the device is switched on.
3. Open the lid and place a vacuum sealer bag in the vacuum
chamber (see ‘Positioning a vacuum sealer bag’).
4. Close the lid.
5. Set the vacuum level with the Vacuum Level touch key
(see ‘Vacuuming’).
The 3 indicator lights display the vacuum level.
The lights flash and diminish during vacuuming.
6. Set the vacuum closure time (sealing time) with the ‘Sealing Time’
touch key (see ‘Vacuuming’).
The 3 indicator lights display the sealing time.
The lights flash and diminish during sealing.
7. Press the Start touch key to start the vacuuming process.
8. Immediately afterwards, shortly press on the front of the lid so
that the vacuum chamber can vacuum.
Note! Vacuuming only works if the lid on the front is quickly pushed into
the rubber gasket!
y
Vacuuming stops automatically if the vacuum sealer bag has been
vacuumed and sealed.
y
Orange indicator lights and orange lighted keys mean that a
function is active.
y
White indicator lights display the chosen setting and white lighted
keys may be operated.