0
Step 4. Connecting electricity, water and drain
1. Connect
Connect
drain hose
The drain hose runs to an inlet plug on the
ink unit’s water trap.
Note:!
The hose must be fastened on a level with the
underside of the sink unit.
Cut the drain hose adapter to the appropriate
size for connection to the undersink drain or gar
bage disposer. The overall length of the drainage
hose must not exceed 4,5 m.
No part of the drainage hose may be more than
950 mm above the bottom of the dishwasher.
The hose must not be run directly to the floor
drain or similar.
The hose must always discharge at least 350
mm above the bottom of the dishwasher.
Max 950mm
Min- 350mm
Min 16mm
2. Connect water supply hose
Connec
Use the supplied O ring and tighten
the connection by hand plus a quarter turn
with a wrench. Open the shutoff valve and
let the pressure settle for a while. Check the
connections again to make sure they are not
leaking.
3. Connect the electric plug
Ensure that the power socket is within the
range of the power cable. Do not use an
extension cord! The dishwasher must be con
nected
to a grounded outlet.
Connection pipe
Clamp
Water connection
Shut
off
valve
Hose barb
coupling
