Atag VA3113QT, Operating Instructions Manual, Page: 63 / 147

Action Possible causes Problem
Check. The door is not properly closed. The dishwasher does not start.
Close the door and wait. After a
while, the dishwasher continues
the program. You have opened the
dishwasher to add more dishes
while a program is in progress.
Check the door lock. If it does
not click into place and lock,
open the door. The door lock has not clicked
into place and locked.
Press and hold the button for the
Auto open option until the button
starts flashing. Wait until it stops
flashing (60 seconds). Close the
door. Check that the door lock
clicks into place and locks.
Check. A fuse/circuit breaker has been
tripped.
Check. The plug is not plugged into the
wall socket.
Check. The water tap is turned off.
Check. Overflow/leaks.
Turn off the water tap. Pull out
the plug and call the service
department. A whirring sound (the drainage
pump) is heard from the
dishwasher and does not stop
when the main power switch is
turned off.
Press and hold the main power
switch until the display turns off
if you want to cancel the
Delayed start option. Restart the
dishwasher. Check that the Delayed start
option has not been selected.
Table continued from last page
26
Troubleshooting