Atag VA2113PT, Operating Instructions Manual

Page: 51 / 146

Self-cleaning program
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes.
This program should be run (with no dishes in the machine) using normal dishwasher detergent or
citric acid. Special dishwasher cleaners are also available on the market. For the removal of limescale
deposits, see Dishwasher tub in the chapter Care and cleaning.
Press and hold the option buttons for
Self-cleaning program to activate the program.
Self-cleaning program starts when the door is
closed.
Self-cleaning program (CLn)
- Select option
To select an option, press one of the option buttons until the option is activated. The available options
vary between program and some options cannot be combined (available options glow dimly).
SpeedWash
This option shortens the program time, but uses more energy and water.
Auto open
2)
The dishwasher door opens automatically, which improves the drying results. Wait until the dishwasher
indicates that the program has ended and the dishes have cooled before unloading the dishwasher.
(If the dishwasher is built-in the surrounding furnishings must be resistant to any condensation from
the dishwasher.)
The drying time for the Auto open option varies between programs.
NOTE!
For the best drying results, do not close the door before the drying phase has finished and the
machine has automatically switched off.
WARNING!
The dishwasher door must not be blocked or closed when opened automatically. Doing so may
damage the door lock mechanism. Wait at least 5 minutes before closing the door.
Extra hygiene
This option is intended for situations where demands on hygiene are especially high, such as when
dishwashing baby bottles and cutting boards. The temperature is increased in both the main wash
and the final rinse.
Delayed start
When you select Delayed start the dishwasher will start 1-24 hours after you close the door.
2)
The Auto open option is pre-selected for some programs.
15