Atag VA2113PT, Operating Instructions Manual

Page: 50 / 146

The main power switch
Press and hold the main power switch until the display lights up. Also check that the water tap is on.
- Select program
Select a program to suit the type of dishes and how dirty they are. Eco is always pre-selected.
Press the Program selector one or more times until the desired program symbol is activated.
Eco
This program is suitable for washing normally dirty dishes and is the most effective program in terms
of combined energy and water consumption. This program is used to assess compliance with EU
legislation on ecodesign.
Auto wash
The dishwasher can measure how dirty the dishes are and adjust water consumption and temperature
accordingly. When newly installed, the program needs to be run five times before it is fully adapted
and can provide the best results.
+ QuickIntensive 1)
QuickIntensive (Auto wash + SpeedWash) is an effective program for slightly dried leftovers. (This
program is not intended for burnt food, such as on oven dishes.)
Intensive wash
Also ideal for use when hygiene demands are especially high, such as for dishwashing baby bottles
and chopping boards.
A program with a high temperature to dissolve grease on very dirty dishes, such as pans, casserole
dishes and oven dishes. If these dishes do not completely fill the dishwasher, you can add plates and
the like.
One hour program
A quick program for slightly dried leftovers. (This program is not intended for burnt food, such as on
oven dishes.)
In combination with SpeedWash, a shorter program is achieved (15 minutes).
Glass
A gentle dishwashing program with a low temperature for washing fragile items made of crystal/glass.
Remember to use a small amount of detergent and to place items so that they do not touch each
other during the wash. See also Fragile dishes in the chapter Loading the dishwasher. Porcelain that
has just been used without dried leftovers can also be washed using this program.
1)
Program time 90 minutes.
14