EN 24
Removing and cleaning the guide rails
Use conventional cleaning products to clean the guide rails.
1. Remove the screw using a screwdriver.
2. Remove the guide rails from the holes in the back wall.
Replacing the oven lamp
The lamp in this household appliance is only suitable for illumination of this
appliance. The lamp is not suitable for household room illumination.
The light bulbs (2x) (halogen G9, 230 V, 25 W) are a consumer items and therefore not
covered by warranty. To replace it, first remove the baking tray, oven rack and guide rails.
Disconnect the appliance from the power supply by removing the plug from the
socket or by switching off the circuit breaker in the fuse box.
Please note: the light bulb can be very hot! To prevent burns, use protection to
remove the light bulb.
3. Remove the four screws from the cover panel. Remove the cover panel, the glass and the
sealing ring.
4. Remove the faulty halogen lamp and replace it with a new one.
5. Replace the cover panel, the glass and the sealing ring.
Attention:
The sealing ring needs to fit perfectly in the oven wall recess.
MAINTENANCE
Summary of Contents for SX4611C
Page 1: ...Instructions for use Oven SX4611C SX4692C...
Page 2: ...EN User manual EN 3 EN 29 Pictograms used Important information Tip...
Page 30: ...EN 30...
Page 31: ...EN 31...
