![Atag OX9011T Instructions For Use Manual Download Page 108](http://html.mh-extra.com/html/atag/ox9011t/ox9011t_instructions-for-use-manual_2995579108.webp)
GB 22
faults
what should I do if...
fault
No display.
Oven or grill does not heat
up.
Temperature is not correct.
Oven light not on.
Oven switches off suddenly.
cause
No power supply.
Fuse in the meter cupboard
defective.
Fuse in the meter cupboard
defective.
End-time set.
Temperature set incorrectly.
Thermostat defective.
End-time set.
No power supply.
Bulb defective.
Working-time limiter has
switched the oven off.
solution
Insert the plug in the socket.
Replace the fuse.
Replace the fuse.
The oven switches on
automatically.
Set the oven temperature
again.
Switch oven off and phone
the service department.
The light will come on when
the door is opened and when
the oven switches on.
Insert the plug in the socket.
Switch oven off and replace
the bulb. Disconnect the
appliance from the power
supply by removing the plug
from the socket or by turning
the main switch in the meter
cupboard. You can snap the
glass cover out of the side
wall of the oven. The bulb is
then accessible. Replace it
with a new bulb 230 V-50 Hz-
300 °C.
Reset the oven.
If the appliance does not work properly, this does not always mean that it is defective.
Try to deal with the problem yourself first. Phone the service department if the advice
given below does not help.
Please visit our website
www.hps.nl
for tips and tricks.
AEP_082368400_OX9011T 01-12-2005 14:48 Pagina GB 22