Atag OX6411, Instructions For Use Manual

Page: 15 / 36

WHAT TO DO IF…
Warning! Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does not oper-
ate. The appliance is not activated. Activate the appliance. Refer to
the chapter "Daily Use".
The appliance does not oper-
ate. The Minute End of
Cooking programmer is not
set. Set the Minute End of
Cooking programmer. Refer to
the chapter "Clock functions".
The appliance does not oper-
ate. The fuse in the fuse box is re-
leased. Do a check of the fuse. If the
fuse is released more than one
time, contact a qualified electri-
cian.
The oven lamp does not oper-
ate. The oven lamp is defective. Replace the oven lamp.
Steam and condensation col-
lect on the food and in the
oven. You left the dish in the oven for
too long. Do not keep the dishes in the
oven for longer than 15 - 20
minutes after the cooking ends.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre. The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
Warning! Refer to the Safety chapters.
15