Atag KA2111DC, Manual, Page: 143 / 164

operating the side-by-side
refrigerator
SETTING UP THE REFRIGERATOR
Now that you have your new refrigerator installed and in place, you are ready to set up and enjoy the full
features and functions of the appliance.
By completing the following steps, your refrigerator should be fully operational. If not, first check the power
supply and electricity source or try the troubleshooting section at the back of this user guide. If you have any
IXUWKHUTXHVWLRQVFRQWDFW\RXUVHUYLFHFHQWHU
3ODFHWKHUHIULJHUDWRULQDQDSSURSULDWHORFDWLRQZLWKUHDVRQDEOHFOHDUDQFHEHWZHHQWKHZDOO
and the refrigerator. Refer to installation instructions in this manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the
doors.
3. Set the temperature control to the coldest temperature and wait for an hour.
The freezer should get slightly chilled and the motor should run smoothly.
$IWHUSRZHULQJWKHUHIULJHUDWRULWZLOOWDNHDIHZKRXUVWRUHDFKWKHDSSURSULDWHWHPSHUDWXUH
Once the refrigerator temperature is sufficiently cool, you can store food and drink in the
refrigerator.
02 OPERA
TING
operating
_23