Atag KA2111DC, Manual

Page: 142 / 164

Removing any residual matter inside the water supply line after installing
filter.
1. Turn ON the main water supply & turn OFF the valve to the
water supply line.
2. Run water through the dispenser until the water runs clear
DSSUR[/7KLVZLOOFOHDQWKHZDWHUVXSSO\V\VWHPDQGUHPRYH
air from the lines.
$GGLWLRQDOƃXVKLQJPD\EHUHTXLUHGLQVRPHKRXVHKROGV
4. Open the refrigerator door and make sure there are no water
leaks coming from the water filter.
$QHZO\LQVWDOOHGZDWHUƂOWHUFDUWULGJHPD\FDXVHZDWHUWR
EULHƃ\VSXUWIURPWKHZDWHUGLVSHQVHU7KLVLVGXHWRDLUJHWWLQJ
into the line. It should pose no problem to operation.
Check the amount of water supplied to the ice tray. (Optional)
/LIWXSWKHLFHPDNHUEXFNHWDQGJHQWO\SXOORXWRIWKHIUHH]HU
:KHQ\RXSUHVVWKH7HVWEXWWRQIRUVHFRQGVWKHLFHFXEHFRQWDLQHULVƂOOHGZLWKZDWHUIURPWKH
ZDWHUVXSSO\WDSDIWHULFHWUD\LVWZLVWHG&KHFNWRPDNHVXUHWKHDPRXQWRIZDWHULVFRUUHFWVHH
WKHLOOXVWUDWLRQEHORZ
If the water level is too low, the ice cubes will be small. This is a water pressure problem from
with in the main water pipes, not the refrigerator.
Ice maker
1
Feeler Arm
2
Test button
Check the water level
22_
setting up