Atag ES1074MG, Instructions For Use Manual

Page: 130 / 160

Switching the light on and off
1. Short touch the lighting key.
• The lighting changes from maximum to minimum strength and
vice versa.
2. Long touch the lighting key to set the lighting strength.
3. Short touch the lighting key to turn off the light.
Changing the colour temperature
You can adjust the lighting temperature.
1. Long touch the lighting key and simultaneously the – (minus) key to make the light ‘colder’ or
the + (plus) key to select a ‘warmer’ light.
Recirculation use
NOTE!
On delivery, this cooker hood is set for exhaust air to the outside. The hood can also be set to
recirculation use (the air is blown back into the room after filtration through grease filters and a
combi-filter).
With an RMS kit (recirculation modification set), the air will first be cleaned by the grease filters,
and then odours will be filtered by the combi-filter. The cleaned air is recirculated back into the
kitchen.
Switching on the recirculation function
1. Continuously touch the timer key and the lighting key simultaneously
until the filter indicator flashes 3 times.
• The cooker hood is set for recirculation use.
Switch off the recirculation function
1. Simultaneously short touch the timer key and the lighting key until the filter indicator stays on.
10
Operation