Atag ES10211SAM, Instructions For Use Manual

Page: 86 / 92

EN 20
INSTALLATION
- Tilt the hood as indicated in
Figure 12 – step 1.
- Use the two pivot pins
C
that are
already present in the construction to hang the
hood on the bracket
B
. Figure 12 - steps 2-3.
- Put the hood in position so that the safety
pin clicks in the gap in the bracket B .
Figure 12 – step 4.
- Please note! Secure the hood directly onto
the bracket B with the 6 screws D (Fig.13).
- Take the safety bracket L and secure this to
the ceiling plate with the two screws
M
as
indicated in Figure 14 – steps 1-2.
Fig.12
Fig.13
Fig.14