Atag CU122554TMM, Manual

Page: 137 / 156

Wi-Fi troubleshooting
Solution Possible cause Symptom
Switch on Wi-Fi (see 'Switching on
Wi-Fi'). Wi-Fi turned off. Wi-Fi icon not shown.
Check that your home network signal
is strong and internet connection is
working. Home network issues. Wi-Fi setup failed.
Please check the network settings.
Ensure a 2.4 GHz and visible network.
If the signal is too weak, try to move the
network router closer to the appliance. The home network is not on
2.4 GHz, the network is
hidden, or the signal strength
is too weak. Home network is not
displayed during connection
setup.
Ensure that Wi-Fi is enabled and the
internet connection in your home
network is working. Repeat the
connection setup if necessary. Wi-Fi is disabled or home
network issues. Appliance is shown
disconnected on the mobile
app.
First disable the Wi-Fi and enable it
again. Check that the internet
connection in your home network is
working. Repeat the connection setup
if necessary.
Further troubleshooting available on
www.connectlife.io or contact the
service department. Different causes. Other Wi-Fi problem.
17
Wi-Fi-connectivity