
GB
Default-Time
Push for approx. 3 seconds
Reloading of standard program - deleting of individual timeprogram
Page GB-18
2200..55
1155::3300
WWEE.. 2255.. JJUUNN..;;0033
°C
TTIIMMEEPPRROOGGRRAAMMSS
HHCC
TTIIMMEEPPRROOGGRRAAMMSS
DDEEFFAAUULLTT TTIIMMEE
Enter timeprogram level
Standard display
select
accept
Example: Direct circuit
accept
Change - Exit :
Each flashing adjustment value can be corrected by means of the
rotary pushbutton and accepted by pressing the button again.
Return to the previous step by means of button
¤
¤
,
return to stan-
dard display by means of button
¢
¢
or automatically after approx.
60 seconds.
select
Heating
circuit
3 sec
DDEEFFAAUULLTT TTIIMMEE
HHCC
DDEEFFAAUULLTT TTIIMMEE
DDEEFFAAUULLTT TTIIMMEE
AALLLL
DDHHWW
j
An individually generated timeprogram can be replaced by its stan-
dard program as shown in the opposite programming schematic.
However, in such cases the individually generated timeprogram will
be irrevocably deleted. For this purpose individual switch-on and
switch-off times as well as specified temperatures should always be
recorded in writing (see page 21).
8A520900_GB.qxp 12.11.2004 13:17 Seite 18