Operating instructions S-HR series page
2
The technical reading
During this reading the display will show in which operating status the
boiler is active. The technical reading
is being repeated every 2
seconds by the reading of the waterpressure
.
The first figure of the technical reading
indicates the status in
which the boiler is active and the third and fourth figure indicate the water
temperature of the boiler. In case of the reading
the character P
stands for pressure which represents the waterpressure. The third and
fourth figure indicate the water-pressure in bar. When a fault occurs it will
be shown by the E of Error with a number code.
The Reset key
The control panel is provided with a reset key. When a fault occurs it will
be shown by the flashing E of Error with a number code after which the
boiler is shut down. After pressing the reset key you can try to start the
boiler again. If the defect keeps returning contact your installer.
reset
key
display
step
key
5
