9
SETTING TRAVEL LIMITS
SETTING DOOR TRAVEL LIMITS
Note:
Door should be moved manually to half open position.
1.
Turn pendant switch anticlockwise to move door to desired
open position (
Fig. 7
).
2.
If desired position is reached and green OPEN limit cam is not
in contact with limit switch, adjust cam until limit switch
“clicks”.
Note:
If green limit cam activates switch before desired open
position is reached, then rotate cam clockwise, then turn pendant
switch to open position to continue travel to desired open position.
Repeat step 2 above if necessary.
3.
Turn pendant switch clockwise to move door to desired closed
position.
4.
If desired position is reached and red CLOSE limit cam is not
in contact with limit switch, adjust cam until limit switch
“clicks”.
Note:
If red limit cam activates switch before desired close
position is reached, then rotate cam anticlockwise, then turn
pendant switch to close position to continue travel to desired close
position. Repeat step 4 above if necessary.
FIG. 8
GREEN OPEN
LIMIT CAM
RED CLOSE
LIMIT CAM
FIG. 7
SPECIFICATIONS
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE:
240V AC 50Hz Single Phase
MOTOR TYPE:
Induction
MOTOR VOLTAGE:
240V Single Phase
MOTOR RATING:
1 H.P. (0.75kW)
MAXIMUM DOOR SIZE:
18m
2
MAXIMUM DOOR HEIGHT:
4700mm (11-Tooth Sprocket)
MAXIMUM DOOR HEIGHT:
6000mm (14-Tooth Sprocket)
DRIVE UNIT WEIGHT:
23Kg
PENDANT SWITCH WEIGHT:
0.5Kg
Please Note:
Specifications are subject to change without notice.
