ATA AXESS 2000 Pro Series Installation Instructions Manual Download Page 3

PLEASE READ THESE IMPORTANT SAFETY RULES

3

Warning - It is vital for the safety of persons to follow all instructions. Failure to comply

with the following Safety Rules may result in serious personal injury and/or property damage.

Thank you for purchasing the ATA Axess Automatic Opener. This
opener is designed to suit commercial heavy duty roller shutter
doors. The components and materials used in this opener are of
the latest technology and highest quality.

OPERATION

To operate the opener simply turn the pendant switch anti-
clockwise to open or clockwise to close the door. The open 
position allows the door to open fully without having to 
constantly hold the switch. For safety the close position requires
continuous contact.

MANUAL OPERATION

The opener is equipped with a unique manual operation device. If
the power to the opener is disrupted for any reason the clutch 
disengages and the door can move manually via the manual chain.
When power is restored the clutch re-engages to allow automatic
operation.

FEATURES

DO NOT

operate the opener unless the door is in full

view and free from objects such as cars and persons.
Make sure that the door has finished moving before
entering or leaving the driveway.

DO NOT

operate the opener when persons are near the

door. Children must be supervised near the door at all
times when the opener is in use. 

SERIOUS 

PERSONAL INJURY

and/or property damage can

result from failure to follow this warning.

DO NOT

allow children to operate the opener. 

SERIOUS PERSONAL

INJURY

AND/OR 

PROPERTY DAMAGE

can result from failure to 

follow this warning.

Frequently examine the installation, in particular  guides
and mountings for signs of wear, damage or imbalance.

DO NOT

use if repair or adjustment is needed since a

fault in the installation or an incorrectly balanced door
may cause injury. 

The opener is not showerproof - it should not be
immersed in water or sprayed directly by a hose or other
water carrying device.

The door must be 

WELL BALANCED

. and in good

working order. A faulty door must be repaired by a 
qualified technician prior to opener installation.

REMOVE OR DISENGAGE

all locks and 

mechanisms prior to installation of the opener.

Keep hands and loose clothing 

CLEAR

of the door and

opener at all times.

Make sure that the door is fully open before driving into
or out of the driveway. And make sure the door is fully
closed before leaving the driveway.

The opener is not intended for use by young children or
infirm persons without adequate supervision. Children
should be supervised to ensure that they do not play with
the opener.

Summary of Contents for AXESS 2000 Pro Series













Reviews: