AT-LA500
–
U
SER MANUAL
R
ELEASE
3.4
–
JUNE
2009
69
Clock Generator
Clock Generator module allows generating a clock signal with a frequency up to 125 MHz.
The clock will be generated on
Ch35
.
It is also possible to combine the clock with the VECTOR(34) signal using the strobe function. The
following options are available: NOP,OR,AND,XOR,NOT, NOR, NAND, XNOR.
The Clock generator also provides a synchronized signal to the Sequencer Module to generate
vectors synchronized with the output clock.
Frequency
It sets the frequency (in MHz) of the Clock Generator.The output
frequency depends on the frequency division set by the user.
Note: user entries could be recalculated to allowed frequency
values.
Duty Cycle
It sets the generated clock duty cycle of the clock signal.
Note: user entries could be recalculated to allowed duty cycle
values.
Delay
It sets the delay to the synchronized signal.
Note: user entries could be recalculated to allowed delay values.
Strobe Operation
It allows combining logically the Output clock with the Vector(34)
signal. The possible logic options are: NOP,OR,AND,XOR,NOT,
NOR, NAND, XNOR, FORCE LOW, FORCE HIGH
Enable
It enables or disables the Clock Generator Module
