Asystems NT1304, User Manual

Page: 4 / 38

2
NT2508 / NT2504 / NT1308 / NT1304 / NT4004
English
1. INTRODUCTION
Congratulations on your purchase of a NT series network amplifier. The NT’s flexible deisgn will provide you with up to
eight channels of audio with advanced DSP processing. A single NT amplifier offers eight-in, eight-out support (or four-in,
four-out), and the entire system can be controlled through standard potentiometers or flexible remote software. Internal
processing is accomplished through a high quality 40-bit floating point processor, with internal signal processors and
routing all handled with ease�
NT series digital network amplifiers offer easy, effective means for injecting signal processors directly into your input
and output path, with clear, easy-to-use software both onboard and on your Windows computer. The software offers full
performance monitoring for each processor, giving real-time information on the load placed upon DSPs
�
2. FEATURES
●
4 or 8 input channels available via 3-pin Euroblock connections
●
Built-in multi-channel amplifier for low-impedance or line distribution application*
●
Amplifier provides up to 250 Watts of power per channel (exact output can be found in specs)
●
4x4 or 8x8 matrix routing input channels to any output channel
●
40-bit floating point processor with internal sampling selectable between 44.1 and 48 kHz
●
4x4 or 8x8 networking capabilities through audio streaming LAN card (sold separately)
●
Ethernet connectivity for network and internet control application
●
Automatic DHCP network IP configuration
●
Easy and intuitive control software from Asystems
●
4-band parametric equalizers can be assigned to all inputs
●
Adjustable compressors and limiters built-in
●
Delay time can be adjusted in meters, feet or milliseconds
●
User-defined crossovers available on output channels
*Operating mode is dependent on purchased model.