manualshive.com logo in svg

ASV RT60-ROW, Operation And Maintenance Manual

Share
Download
ASV RT60-ROW Operation And Maintenance Manual Download Page 23

2.15 Parking the Machine

• 

Stop the machine only on an even and solid surface.

• 

Lower the lift arms to the frame stop and rest the bucket on the ground.

• 

Shut the machine down as described in section 5.13.

• 

Close the machine doors and windows (if equipped), remove the key to 
secure the machine against unauthorized use.

2.16 Towing/Retrieving the Machine

(see note below)

• 

Always observe the correct procedure as described in the operating 
instructions.

• 

The machine should be towed only in exceptional cases, for example to 
bring the machine away from an endangered place for repair.

• 

Check all trailing and drawing devices for their safety when pulling or 
towing.

• 

Towing equipment such as ropes, etc., must be of the correct capacity and 
must use at least two of the d-rings on the front or rear of the chassis. 

•

Pull the rope taut slowly and carefully. A sudden jerk can cause a sagging 
rope or cable to tear or snap.

2 SAFETY

22

RT-60/R160T/R190T ROW O&M
0404-659   2016-05

https://tractormanualz.com/

Summary of Contents for RT60-ROW






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands