MAINTENANCE
Undercarriages
54
Track Installation
1.
Slide the track over the
drive sprocket at the rear of
the machine. (fig. 1)
2.
Slide the front of the track
into position for installation.
3.
Lubricate the inner front
wheel(s) and the inside of
the front portion of the track
with a spray lubricant.(fig. 2)
4.
Attach a ratchet strap to
the upper front portion of the
track and the other end to
one of the tow hooks on the
front of the machine. (fig. 3)
5.
Tighten the strap until the
track is pulled upward slight-
ly and in position to slide
over the inner idler wheel(s)
at the front. (fig. 3)
6.
Pull all of the slack forward
and make sure the track
drive lugs are properly
meshed with the sprocket to
provide as much slack as
possible for installation.
7.
If you have an assistant,
have them pull the track for-
ward while you push inward
on the track. Work the track
over the wheel(s) and into
place.
8.
If you do not have an assis-
tant, push the track forward
in inward in a quick forceful
motion to slide the track into
place. The ratchet strap will
help to keep the track in
place while you work it over
the idler(s). (fig. 4, 5)
1
2
3
4
5
Summary of Contents for PT-80
