ASV 0404-766 Operation And Maintenance Manual Download | Manualshive

Page: 4 / 95

background image

1 INTRODUCTION

2

1.1 Product Identification (PIN)

The machine PIN is located on the identification plate, on the outer left side of the
cab enclosure.

Please state the model of the machine and PIN when making inquiries in regards
to parts, service, or warranty.

1.2 Introduction

Thank you for purchasing an RT-40 Compact Track Loader.

We are confident

that the machine you have chosen will provide excellent performance and effi-
cient operation.

The information contained in this manual is intended to provide the operator with
all necessary information for the proper use of the machine.

It is imperative that this manual be provided to the end user at the time of pur-
chase, prior to operation and kept with the machine at all times. If lost or dam-
aged, contact your dealer immediately to obtain a replacement prior to resuming
operation.

The operator is responsible for the safe operation of the machine.

The operator must read, understand and obey the instructions in both this
and the AEM safety manual for skid steer and compact track loaders prior
to operating or performing maintenance or service on the machine.

Should you need clarification or further explanation of the topics in this manual,
please contact your dealer immediately for assistance.

Information describing special equipment or attachments and their operation are
not included in this manual.

This manual should be stored in the provided manual storage location in the cab
of the machine.

1.3 Safety Alert Symbol

The safety alert symbol is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.

1.4 Intended Use

The machine with bucket attachment is intended to be used solely for work con-
sistent with its design. Such work includes loosening, collecting, transporting, and
distributing soil, rock, or similar materials as well as loading these materials onto
trucks, conveyors, or other methods of transport.

RT-40 US O&M
0404-766 2019-05

«
...
2
3
4
5
6
...
»

Summary of Contents for 0404-766
































































































Reviews:

No comments

Related manuals for 0404-766

Brand: Case Pages: 51

Brand: Land Pride Pages: 34

Brand: RAMROD Pages: 36

PalletPal Stack-n-Go FPS3000-43 NAS

Brand: Southworth Pages: 29

Brand: Komatsu Pages: 18

Brand: Komatsu Pages: 31

Brand: Komatsu Pages: 4

Brand: Komatsu Pages: 6

Brand: Komatsu Pages: 51

Brand: Komatsu Pages: 41

Brand: Komatsu Pages: 304

Brand: Komatsu Pages: 321

Brand: Komatsu Pages: 412

Brand: Komatsu Pages: 528

Brand: Komatsu Pages: 554

Brand: diamond mowers Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands