9
5. Once the latch is secure, you can lock it in place using the disk tray lock. Using a flathead screwdriver, turn
the lock counterclockwise to lock the latch mechanism. Turning the lock clockwise will unlock it.
Note: Disk tray locks can be found on AS62 series devices.
Connecting and Powering on the NAS
1.
Connect the NAS to its power supply.
2.
Connect the NAS to your router, switch or hub using an Ethernet cable.
3.
Press and hold down the power button for 1
– 2 seconds until the blue power LED indicator is lit. This
indicates that the NAS is now powered on. While the NAS is being powered on, the green system status
LED indicator will flash and the blue network LED indicator will be lit as well.
Summary of Contents for 90IX0101-BW3S10
Page 26: ...26 Click on Change adapter settings in the left hand panel ...
Page 29: ...29 ...
