25
Rear Panel
Troubleshooting
Q:
Why can’t I detect my ASUSTOR NAS using ASUSTOR Control Center?
A: If you are having trouble detecting your NAS using ASUSTOR Control Center, please do
the following:
1. Please check your network connection:
Make sure that your computer and your NAS are part of the same local area network.
Check to see if the network LED indicator is lit. If you find that it is not lit, try connecting your Ethernet cable
to the other network port or try using a different Ethernet cable.
2. Please first disable any firewalls that may be running on your computer. Then try scanning for your NAS
again using ASUSTOR Control Center.
3. If you still cannot detect your NAS, please connect your NAS to your computer using the provided RJ-45
network cable and change your computer’s IP settings.
Select
[Start]
[Control Panel]
[Network and Sharing Center]
1. Service LED
2. Reset Button
3. HDMI Port
4. USB 3.0 Port
5. RJ45 Port
6. S/PDIF Port
7. Console Port
8. Power Supply
Summary of Contents for 90IX0101-BW3S10
Page 26: ...26 Click on Change adapter settings in the left hand panel ...
Page 29: ...29 ...
