ASUSTeK COMPUTER W480EI-IM-A, Manual

Page: 32 / 59

W480EI-IM-A
2-24
19.
Digital audio header (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF)
port. Connect the S/PDIF Out module cable to this connector, then install the
module to a slot opening at the back of the system chassis.
PIN 1
SPDIF_OUT
+5V SPDIFOUT GND
NOTE: The SPDIF Out module is purchased separately.
Connector type
HEADER 1x4p, K2, 2.54mm pitch
20. Front panel audio header (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports HD Audio standard. Connect one end of the front panel audio I/O
module cable to this connector.
IMPORTANT!
• We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard’s high-definition audio
capability.
• If you want to connect a high-definition front panel audio module to this
connector, set the HD Audio Controller item in the BIOS Setup to [Enabled].
AAFP
PIN 1
GND NC A_JD_FMIC1 A_JD_HPOUT
A_FMIC1_L A_FMIC1_R A_HPOUT_R
A_JD_FRONT A_HPOUT_L
Connector type HEADER 2x5p, K8, 2.54mm pitch