ASUSTeK COMPUTER W480EI-IM-A, Manual

Page: 27 / 59

2-19
Chapter 2: Motherboard information
8. Front panel system panel header (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
• System power LED (2-pin +PWR_LED)
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin +HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The IDE LED lights up or flashes when data is
read from or written to the HDD.
• ATX power button/soft-off button (2-pin PWR_BTN)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
PIN 1
PWR_BTN
PLED+ PLED-
PWRBTN#_PANEL GND
HDD_LED-
GND
O_RSTCON#_PR
NC
+PWR_LED
+HDD_LED RESET
F_PANEL
Connector type Header 2x5p, K10, 2.54mm pitch