ASUSTeK COMPUTER MAXIMUS X HERO, User Manual

Page: 94 / 116

4-2
Chapter 4: RAID Support
Chapter 4
4.1.2 Installing storage devices
The motherboard supports Serial ATA hard disk drives and PCIE SSD storage devices. For
optimal performance, install identical drives of the same model and capacity when creating a
disk array.
Refer to Chapter 2 for details on installing storage devices to your motherboard.
4.1.3 Intel
®
Rapid Storage Technology in UEFI BIOS
To enter the Intel ® Rapid Storage Technology in UEFI BIOS:
1. Enter the BIOS Setup during POST.
2. Go to the
Advanced
menu >
PCH Storage Configuration
, then press <Enter>.
3. Set the SATA Mode Selection item to
[Intel RST Premium With Intel Optane System
Acceleration (RAID)] .
If you are using PCIE storage devices, ensure to enable all the PCIE Storage RAID
Support
items.
4. Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM , then
set the item to [Disabled] .
5. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
6. Go to the Advanced menu > Intel(R) Rapid Storage Technology , then press <Enter>
to display the Intel
®
Rapid Storage Technology menu.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.
Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at
RAID mode together.